docs(docker): Revert to mounting /etc/resolv.conf as configs: won't work

* Fix wording to make mounting resolv.conf more imperative
* Linting and other changes

docs/deploying/docker.mdx

@@ -113,24 +113,22 @@ See the [reference configuration](../reference/config) page for all config optio
 These examples include reverse proxy configurations for Matrix federation, which will route your Matrix domain (and optionally .well-known paths) to Continuwuity.
 
 :::note Docker DNS Performance
-Docker's default DNS resolver are [known to cause issues](../troubleshooting#dns-issues) for Matrix federation such as very slow federation or DNS timeouts. As a workaround, we will mount a custom `/etc/resolv.conf` config file into the Continuwuity service, in order to bypass Docker and use a more performant resolver.
+Docker's default DNS resolver are known to [cause timeout issues](../troubleshooting#dns-issues) for Matrix federation. To bypass it and use a more performant resolver, mount a custom `/etc/resolv.conf` config file into the Continuwuity container.
 
 ```yaml title='docker-compose.yml'
 services:
   homeserver:
     # ...
-    configs:
+    volumes:
-      - source: continuwuity-resolv.conf
+      - ./continuwuity-resolv.conf:/etc/resolv.conf
-        target: /etc/resolv.conf
+```
 
-configs:
+```txt title='continuwuity-resolv.conf'
-  continuwuity-resolv.conf:
-    content: |
 nameserver 1.0.0.1
 nameserver 1.1.1.1
 ```
 
-It is strongly recommended to consult the [**DNS tuning guide**](../advanced/dns) for full solutions to this issue.
+Consult the [**DNS tuning guide (recommended)**](../advanced/dns) for full solutions to this issue.
 :::
 
 #### Caddy (using Caddyfile)

docs/public/deploying/docker-compose.for-traefik.yml

@@ -7,6 +7,7 @@ services:
     command: /sbin/conduwuit
     volumes:
       - db:/var/lib/continuwuity
+      - ./continuwuity-resolv.conf:/etc/resolv.conf # use custom resolvers rather than Docker's
       #- ./continuwuity.toml:/etc/continuwuity.toml
     networks:
       - proxy
@@ -34,14 +35,6 @@ services:
         client=https://matrix.example.com,
         server=matrix.example.com:443
         }
-    #cpuset: "0-4" # Uncomment to limit to specific CPU cores
-    ulimits: # Continuwuity uses quite a few file descriptors, and on some systems it defaults to 1024, so you can tell docker to increase it
-      nofile:
-        soft: 1048567
-        hard: 1048567
-    configs: # using custom resolver instead of Docker's
-      - source: continuwuity-resolv.conf
-        target: /etc/resolv.conf
 
 volumes:
   db:
@@ -51,9 +44,3 @@ networks:
   # name, don't forget to change it here and in the docker-compose.override.yml
   proxy:
     external: true
-
-configs:
-  continuwuity-resolv.conf:
-    content: |
-      nameserver 1.0.0.1
-      nameserver 1.1.1.1

docs/public/deploying/docker-compose.with-caddy-labels.yml

@@ -24,6 +24,7 @@ services:
         command: /sbin/conduwuit
         volumes:
             - db:/var/lib/continuwuity
+            - ./continuwuity-resolv.conf:/etc/resolv.conf # use custom resolvers rather than Docker's
             #- ./continuwuity.toml:/etc/continuwuity.toml
         environment:
             CONTINUWUITY_SERVER_NAME: example.com # EDIT THIS
@@ -40,18 +41,8 @@ services:
         labels:
             caddy: matrix.example.com
             caddy.reverse_proxy: "{{upstreams 8008}}"
-        configs: # using custom resolver instead of Docker's
-            - source: continuwuity-resolv.conf
-              target: /etc/resolv.conf
 volumes:
     db:
 
 networks:
     caddy:
-
-configs:
-    continuwuity-resolv.conf:
-        content: |
-            nameserver 1.0.0.1
-            nameserver 1.1.1.1
-

docs/public/deploying/docker-compose.with-caddy.yml

@@ -20,6 +20,7 @@ services:
         command: /sbin/conduwuit
         volumes:
             - db:/var/lib/continuwuity
+            - ./continuwuity-resolv.conf:/etc/resolv.conf # use custom resolvers rather than Docker's
             #- ./continuwuity.toml:/etc/continuwuity.toml
         environment:
             CONTINUWUITY_SERVER_NAME: example.com
@@ -29,9 +30,6 @@ services:
             #CONTINUWUITY_CONFIG: '/etc/continuwuity.toml' # Uncomment if you mapped config toml above
         networks:
             - caddy
-        configs: # using custom resolvers instead of Docker's
-            - source: continuwuity-resolv.conf
-              target: /etc/resolv.conf
 
 networks:
     caddy:
@@ -45,8 +43,3 @@ configs:
             https://example.com, https://example.com:8448 {
                 reverse_proxy http://homeserver:8008
             }
-
-    continuwuity-resolv.conf:
-        content: |
-            nameserver 1.0.0.1
-            nameserver 1.1.1.1

docs/public/deploying/docker-compose.with-traefik.yml

@@ -7,6 +7,7 @@ services:
     command: /sbin/conduwuit
     volumes:
       - db:/var/lib/continuwuity
+      - ./continuwuity-resolv.conf:/etc/resolv.conf # use custom resolvers rather than Docker's
       #- ./continuwuity.toml:/etc/continuwuity.toml
     networks:
       - proxy
@@ -31,14 +32,6 @@ services:
           client=https://matrix.example.com,
           server=matrix.example.com:443
         }
-    #cpuset: "0-4" # Uncomment to limit to specific CPU cores
-    ulimits: # Continuwuity uses quite a few file descriptors, and on some systems it defaults to 1024, so you can tell docker to increase it
-      nofile:
-        soft: 1048567
-        hard: 1048567
-    configs: # using custom resolver instead of Docker's
-      - source: continuwuity-resolv.conf
-        target: /etc/resolv.conf
 
   traefik:
     image: "traefik:latest"
@@ -91,9 +84,3 @@ volumes:
 
 networks:
   proxy:
-
-configs:
-  continuwuity-resolv.conf:
-    content: |
-      nameserver 1.0.0.1
-      nameserver 1.1.1.1

docs/public/deploying/docker-compose.yml

@@ -9,6 +9,7 @@ services:
             - 127.0.0.1:8008:8008
         volumes:
             - db:/var/lib/continuwuity
+            - ./continuwuity-resolv.conf:/etc/resolv.conf # use custom resolvers rather than Docker's
             #- ./continuwuity.toml:/etc/continuwuity.toml
         environment:
             CONTINUWUITY_SERVER_NAME: example.com # EDIT THIS
@@ -16,16 +17,6 @@ services:
             CONTINUWUITY_ADDRESS: 0.0.0.0
             CONTINUWUITY_PORT: 8008
             #CONTINUWUITY_CONFIG: '/etc/continuwuity.toml' # Uncomment if you mapped config toml above
-        configs: # using custom resolver instead of Docker's
-            - source: continuwuity-resolv.conf
-              target: /etc/resolv.conf
-
 
 volumes:
     db:
-
-configs:
-    continuwuity-resolv.conf:
-        content: |
-            nameserver 1.0.0.1
-            nameserver 1.1.1.1